Fellow Products

Finally found the exact M3 x 6mm screws to fix my grinder's burr alignment—no more wobble during grinding. The Phillips head made it easy to tighten them down evenly without stripping.

Wasn't sure if these would match precisely, but the 6mm length is spot-on for my grinder's burr carrier. No more wobble or uneven grind now that I've swapped in the new screws.

These screws fit perfectly and the M3 x 6mm size was exactly what I needed for my grinder. A tiny but solid fix that saved me from buying a whole new machine.

Was looking for a quick fix after my grind consistency started drifting — these M3 screws fit perfectly and the 6mm length was exactly what the grinder needed. Installation took maybe five minutes and now my settings actually hold steady through multiple uses.

Had a frustrating issue with my grinder not getting fine enough for espresso, but swapping in these M3 x 6mm screws fixed it completely. The threads are clean and bite nicely, no stripping when tightening. Took all of two minutes to replace the old ones.

These little screws fit perfectly and fixed the alignment issue I was having. My pours are finally consistent and the grind adjustment actually clicks into place now.

I was having trouble dialing in my pour-over grind, but swapping these screws made the adjustment ring operate smoothly without any play. The M3 size was exactly what I needed.

These screws fit perfectly and solved my alignment issue with zero fuss. The Phillips head made installation simple with just a standard screwdriver. For four bucks, this pack is a no-brainer if your burrs need adjusting.

I've been tweaking my grind settings for weeks, and these M3 screws made dialing in espresso way more stable. The Phillips head is a good fit too, no stripping like with the stock ones.

Finally, a pack that actually fits the Ode's burr carrier properly—the 6mm length is perfect. My grind consistency improved noticeably after swapping these in, no more wobble.