Espresso Series 1 Base Foot Replacement: Fix a Wobbly Machine
By Fellow Products | Published: 2026-11-03
Category: 使い方ガイド
Stop your Espresso Series 1 from rocking on the counter. This step-by-step guide shows how to replace a worn base foot and level the machine safely.
Quick answer
Replace the worn base foot with a genuine Espresso Series 1 Base Foot and re-level the machine on a flat, stable counter. This restores stability and prevents rocking during operation.
Why a wobbly machine needs attention
A wobbly espresso machine is more than a nuisance—it can cause spills, uneven extraction, and unnecessary wear on internal components. The base feet are designed to absorb vibration and keep the machine level. When one foot wears down or goes missing, the machine rocks, which can affect performance and safety.
Before replacing the foot, check that the wobble isn’t caused by debris under the machine or an uneven countertop. A quick clean and a level test can save you an unnecessary repair.
When to replace the base foot
Inspect the feet for cracks, flattening, or missing pieces. If the rubber has hardened or compressed over time, it won’t grip the counter properly. Replacement is straightforward and inexpensive, making it a sensible first fix for wobbling.
Step-by-step base foot replacement
- Unplug and empty the machine: Turn off the Espresso Series 1, unplug it from the outlet, and remove the water tank and portafilter to reduce weight and prevent spills. Always unplug before any maintenance—never work on a powered machine.
- Lay the machine on its side: Place a soft towel on a flat surface and gently lay the machine on its side to access the base. Avoid resting it on the control panel or any protruding parts. Use a towel to prevent scratches and protect delicate components.
- Remove the old base foot: Locate the damaged foot and pull it straight out. If it’s stuck, wiggle gently—do not use sharp tools that could scratch the base. Check for any debris in the mounting hole and clean it before installing the new foot.
- Install the new base foot: Press the new Espresso Series 1 Base Foot firmly into the mounting hole until it sits flush. Ensure it’s fully seated and level with the other feet. A properly seated foot should not wobble or protrude.
- Set the machine upright and test: Lift the machine back to its upright position and place it on a level counter. Gently press down on each corner to confirm stability—there should be no rocking. If wobble persists, check the other feet or the countertop for unevenness.
Product facts
- Espresso Series 1 Base Foot: Compatible exclusively with the Espresso Series 1. Ensures a precise fit and reliable performance for your machine model.
Espresso Series 1 Base Foot
